Dr. rer. nat. Benjamin Baudrit

Benjamin Baudrit studied Chemistry concentrating on Materials Sciences at Joseph Fourier University in Grenoble (France), Engineering in Polymer Science and Technology at Coventry University (England) and Applied Chemistry with the focus on Polymer Science at the Technical College in Münster. The title of his Masters thesis at Elastogran GmbH (BASF AG group), Lemförde was In-situ Determination of the Rheological Properties of Polyurethane Rigid Foams. Thereafter, he obtained his doctor's degree at Süddeutsches Kunststoff-Zentrum (SKZ), Würzburg on the subject: Determination of the Mechanical Properties of PVC U Profiles by Means of DMA. Since 2007, he has been a scientific employee in plastics research and development in the Joining of Thermoplastics division of SKZ. He currently heads the "Material Development, Compounding and Extrusion" and "Products and Processes" departments at SKZ. Since 2021, he has headed the "Material Development, Compounding and Extrusion" and "Products and Processes" departments at SKZ.

43 Artikel

Joining amorphous thermoplastics with the aid of vacuum ultraviolet radiation

M. Sc. Christian Eck, M. Sc. Michael Heilig, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Prof. Dr.-Ing. Martin Bastian

Issue 1 (2024) Volume 18

Peer-reviewed papers, 36 - 43

Heat flux measurements during the heated tool welding of polypropylene

Dr. Christian Balzer, M. Sc. Marian Heller, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Prof. Dr.-Ing. Martin Bastian

Issue 2 (2023) Volume 17

Peer-reviewed papers, 98 - 104

Fatigue behaviour of vibration-welded joints made of Polyamide 6.6

Dr. Christian Balzer, M. Sc. Hanna Beckensträter, Dr.-Ing. Kurt Engelsing, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein

Issue 1 (2022) Volume 16

Peer-reviewed papers, 44 - 49

Non-destructive testing of the degree of curing with unilateral NMR

Dr. rer. nat. Norbert Halmen, Dipl.-Ing. Ulrich Hack, Dr. rer. nat. Linda Mittelberg, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Prof. Dr.-Ing. Martin Bastian

Issue 1 (2022) Volume 16

Peer-reviewed papers, 28 - 34

Non-destructive integrity test for butt-welded plastic pipes on the construction site - Bead bend back test

M. Eng. Marc Eckes, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Prof. Dr.-Ing. Martin Bastian

Issue 3-4 (2021) Volume 15

Peer-reviewed papers, 156 - 161

Simulation and adhesive bonding of continuous fibre reinforced thermoplastics

M. Sc. Julian Hesselbach, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Prof. Dr.-Ing. Martin Bastian, Dr. Olaf Hesebeck, Dr. Vinicius Carillo Beber

Issue 2 (2021) Volume 15

Peer-reviewed papers, 92 - 99

Conformable conductive adhesives - Modifi cation of conformable adhesives and embedding compounds with carbon nanotubes using the example of silicons

M. Sc. Heinrich Leicht, Dr. Eduard Kraus, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Prof. Dr.-Ing. Martin Bastian, Dr.-Ing. Maurice Langer, Dipl.-Ing. Annett Klotzbach

Issue 1 (2021) Volume 15

Peer-reviewed papers, 42 - 48

Thermography for quality assurance in the case of ultrasonic welding

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dipl.-Ing. Christopher Pommer, Dr. rer. nat. Thomas Hochrein

Issue 3-4 (2020) Volume 14

Peer-reviewed papers, 156 - 163

Adhesive bonding joining technologies for additively manufactured plastic components

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, M. Sc. Heinrich Leicht, Dr. rer. nat. Thomas Hochrein, M. Sc. Julian Hesselbach

Issue 3-4 (2020) Volume 14

Peer-reviewed papers, 164 - 171

Plasma-based bonding agents for adhesive-bonded joints on unplasticised polyvinyl chloride

Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr. Uwe Lommatzsch, M. Sc. Christian Eck, Dr. rer. nat. Thomas Hochrein, Stefanie Kaprolat

Issue 2 (2020) Volume 14

Peer-reviewed papers, 89 - 95

Mechanical long-term strengths of laserbeam- welded lap and T-joints made of ABS

Dr.-Ing. Stephan Roth, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Kurt Engelsing, M. Sc. Bastian Geißler, Dr. Christian Balzer, M. Sc. Manuel Hille, M. Sc. Bernd Niese

Issue 1 (2020) Volume 14

Peer-reviewed papers, 36 - 43

Inline monitoring of the adhesive curing with contactless ultrasound

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. rer. nat. Thomas Hochrein, Dipl.-Ing. (FH) Giovanni Schober, M. Sc. Lukas Orf

Issue 2 (2019) Volume 13

Peer-reviewed papers, 90 - 95

Long-term loading of welded joints – What infuence do cyclic loads have on ultrasonically welded joints?

Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Kurt Engelsing, Dipl.-Ing. Christopher Pommer, Dr.-Ing. Frédéric Achereiner, Dr. rer. nat. Thomas Hochrein

Issue 1 (2019) Volume 13

Peer-reviewed papers, 22 - 28

The challenges in joining technology are not diminishing

Dr. rer. nat. Benjamin Baudrit

Issue 1 (2019) Volume 13

Editorial, 3

Lock-in thermography for recognising defects in joints between plastics

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, M. Sc. Heinrich Leicht, Dr. rer. nat. Thomas Hochrein

Issue 3-4 (2018) Volume 12

Peer-reviewed papers, 180 - 186

Welding of laser-sintered PA12 plastic components, Part 2 – Heated tool welding

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, M. Sc. Michael Heilig, Dr. rer. nat. Thomas Hochrein

Issue 2 (2018) Volume 12

Peer-reviewed papers, 102 - 109

Welding of laser-sintered plastic components – Part 1 Ultrasonic welding

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, M. Sc. Michael Heilig, M. Sc. Heinrich Leicht, Dr. rer. nat. Thomas Hochrein

Issue 1 (2018) Volume 12

Peer-reviewed papers, 30 - 37

Kurzzeit-Prüfung von geschweißten Fluorkunststoffen

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer

Issue 2 (2017) Volume 11

Peer-reviewed papers, 98 - 106

Verbesserung der Adhäsion auf Kunststoff - oberflächen durch Vorbehandlung mit UV-Laser

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Peter Heidemeyer

Issue 2 (2016) Volume 10

Peer-reviewed papers, 116 - 123

Are training and guidelines still needed?

Dr. rer. nat. Benjamin Baudrit

Issue 1 (2016) Volume 10

Editorial, 3

Successful welding of films made of bioplastics, Part 2 - Ultrasonic welding and high-frequency welding

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Neda Stöhr

Issue 1 (2016) Volume 10

Peer-reviewed papers, 21 - 29

Untersuchungen zum Infrarot-Schweißen von PVC-Fensterprofilen

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, M. Sc. Christian Eck, Dipl.-Volksw. Oliver Stübs

Issue 1 (2015) Volume 9

Peer-reviewed papers, 48 - 54

Hochgefüllte holzfaserverstärkte Kunststoffe richtig kleben

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Peter Heidemeyer, Dr.-Ing. Karsten Kretschmer

Issue 1 (2015) Volume 9

Peer-reviewed papers, 33 - 39

Energy efficiency during heated tool welding

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. (FH) Martin Dommer, Dipl.-Volksw. Oliver Stübs, Dr. Sabine Kressirer, Dipl.-Ing. (FH) Michael Schmitt

Issue 3-4 (2014) Volume 8

Peer-reviewed papers, 197 - 203

Portable measuring system on the basis of terahertz time domain technology for the non-destructive testing of welded and adhesive-bonded joints - possibilities and limits

Prof. Dr.-Ing. Martin Bastian, M. Eng. Sebastian Horlemann, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Peter Heidemeyer, Prof. Dr. Martin Koch, M.Sc. Stefan Busch, Dipl.-Ing. Thorsten Probst

Issue 3-4 (2014) Volume 8

Peer-reviewed papers, 190 - 196

Insights into the ultrasonic sealing process

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Prof. Dr.-Ing. Jens-Peter Majschak, Dipl.-Ing. Karsten Thürling, Dipl.-Ing. Neda Stöhr, Dipl.-Ing. Benjamin Stephan

Issue 1 (2014) Volume 8

Peer-reviewed papers, 46 - 51

Safe extrusion welding of fluoroplastics

Dr. rer. nat. Benjamin Baudrit, Holger Schmidt, Ralf Lenk, Dipl.-Ing. Andreas Kunz

Issue 3-4 (2013) Volume 7

Peer-reviewed papers, 169 - 175

Investigation into the fatigue behaviour of joints executed by means of heated tool butt welding using the example of plastic pipes and windows

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Frank Dorbath, Dr.-Ing. Kurt Engelsing

Issue 2 (2013) Volume 7

Peer-reviewed papers, 92 - 97

Economic and ecological assessments with regard to the welding of plastic pipes

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Volksw. Oliver Stübs

Issue 3-4 (2012) Volume 6

Peer-reviewed papers, 194 - 200

Welding of similar plastics with extremely different rheological properties

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dipl.-Ing. Dietmar Kraft, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Ulrich Hack

Issue 2 (2012) Volume 6

Peer-reviewed papers, 108 - 115

Research is exciting ... and worthwhile!

Dr. rer. nat. Benjamin Baudrit

Issue 1 (2012) Volume 6

Regular Features, 3

Modelling and simulation of the heated tool butt welding process using CFD (computational fluid dynamics) software

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dipl.-Ing. Dietmar Kraft, Dr.-Ing. Peter Heidemeyer, M. Sc. Christian Eck

Issue 1 (2012) Volume 6

Peer-reviewed papers, 44 - 49

WPCs are weldable by means of HS, US and VIB

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Milorad Bogdanovic

Issue 3-4 (2011) Volume 5

Peer-reviewed papers, 198 - 207

Investigation into the oxide coat formation on PE pipes and its removal before sleeve welding with an incorporated heating element

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Frank Dorbath

Issue 2 (2011) Volume 5

Peer-reviewed papers, 102 - 110

Ultrasonic sealing of packaging films

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Frank Dorbath, Prof. Dr.-Ing. Jens-Peter Majschak, Dipl.-Ing. Karsten Thürling, Dipl.-Ing. Sascha Bach

Issue 2 (2011) Volume 5

Peer-reviewed papers, 130 - 133

Development of the sleeve welding process with an incorporated heating element for the joining of large-diameter pipes made of polyethylene using universally applicable flexible wound sleeves

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Jürgen Kern

Issue 1 (2011) Volume 5

Peer-reviewed papers, 26 - 33

Terahertz spectroscopy for the non-destructive testing of plastic joints with focus on weld quality

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dr.-Ing. Peter Heidemeyer, Dipl.-Ing. Steffen Wietzke, Dipl.-Ing. Christian Jansen, Prof. Dr. Martin Koch, Dipl.-Wirtsch.-Ing. Norman Krumbholz, Dipl.-Ing. Ole Peters

Issue 3-4 (2010) Volume 4

Peer-reviewed papers, 170 - 177

Development of a test procedure for establishing the mechanical properties of electro fusion and heated tool sleeve welds with mechanised torsional and linear shear tests (Part 2: The linear shear test)

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dipl.-Ing. Dietmar Kraft, Dr.-Ing. Peter Heidemeyer

Issue 3-4 (2010) Volume 4

Peer-reviewed papers, 178 - 183

Evaluation and improvement of the economic efficiency of welding PVC window profiles

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dipl.-Ing. Dietmar Kraft, Dipl.-Ing. Stefan Kleinschnitz, Dr.-Ing. Peter Heidemeyer

Issue 2 (2010) Volume 4

Peer-reviewed papers, 96 - 101

Development of a test procedure for establishing the mechanical properties of electro fusion and heated tool sleeve welds with mechanised torsional and linear shear tests (Part 1: The torsional shear test)

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dipl.-Ing. Dietmar Kraft, Dr.-Ing. Peter Heidemeyer

Issue 2 (2010) Volume 4

Peer-reviewed papers, 108 - 115

Multi-orbital friction welding of pipes made of polyolefins

Prof. Dr.-Ing. Martin Bastian, Dr. rer. nat. Benjamin Baudrit, Dr. Eduard Kraus, Dipl. Ing. (TU) Utz Reinel, Dipl. Ing. (FH) Jörg Rücker, Dipl.-Kfm. Jochen Seeghitz

Issue 3 (2009) Volume 3

Peer-reviewed papers, 176 - 179