1-20 / 55 Issues

Issue 3 (2024)

Issue 3 (2024)

Welding process strategies for the heated tool welding of high wall thicknesses

Machine learning methods for inline quality assurance in heated tool welding

Investigation and optimisation of the mechanical properties of adhesive-bonded joints between additively manufactured plastic components

Issue 2 (2024)

Issue 2 (2024)

Structural direct joints between metal and plastic – Influences of the surface structuring on the bonding strength

Analysis of the insertion and overtightening torques of plastic nuts depending on the air humidity

Influences of the convective heating on the material damage to plastics during hot gas series welding

Issue 1 (2024) Volume 18

Issue 1 (2024) Volume 18

Laser direct joining of metals and polymers using modulated cw laser radiation – one beam source for two processes

Long-term properties of butt fusion welds on gas pressure pipes made of unplasticised Polyamide 12

Joining amorphous thermoplastics with the aid of vacuum ultraviolet radiation

Issue 3-4 (2023) Volume 17

Issue 3-4 (2023) Volume 17

Determination of material data in the ultrasonic range – Characterisation of temperature-dependent storage and loss moduli at a typical ultrasonic welding frequency of 20 kHz

Deformation of pin-like structures in the joining process in order to produce form-fit multimaterial joints

Effects of different heating strategies on infrared-heated polyphthalamides

Issue 2 (2023) Volume 17

Issue 2 (2023) Volume 17

New magnetic measuring method as an alternative to DSC

Elastoweld – Welding of composites consisting of thermoplastic elastomers and thermoplastics

Investigations in order to validate a spectrometer for the characterisation of infrared radiators

Issue 1 (2023) Volume 17

Issue 1 (2023) Volume 17

Development of scale-up rules for the quasisimultaneous laser transmission welding (QSW) of thermoplastics

Development and analysis of a joining strategy for FPC/metal mixed joints on the basis of the CMT pin welding technology

Characteristic weld values for the designing of high-temperature-resistant thermoplastic components with optimised service lives

Issue 3-4 (2022) Volume 16

Issue 3-4 (2022) Volume 16

Adhesive bonding of injection-moulded plastics using stress-cracking-active adhesives

Weld peculiarities of infrared-welded joints between laser-sintered and injection-moulded components

Consideration of rheological processes during the welding of plastics by means of numerical simulation and microscopic analyses

Issue 2 (2022) Volume 16

Issue 2 (2022) Volume 16

Dimensioning and optimisation of directly screwed joints between parts which are made of ABS and are 3D-printed in the FDM procedure

Welding of laser-sintered and injection-moulded plastic components

Investigations into the utilisation properties and procedural limits of thermal direct joining

Issue 1 (2022) Volume 16

Issue 1 (2022) Volume 16

Thermal riveting of polymer materials - Computer- aided process modeling and comparison with experimental data

Non-destructive testing of the degree of curing with unilateral NMR

Laser transmission welding of thermoplastics at longer wavelengths

Issue 3-4 (2021) Volume 15

Issue 3-4 (2021) Volume 15

Non-destructive integrity test for butt-welded plastic pipes on the construction site - Bead bend back test

Development of a thermal simulation model for the laser transmission joining of PA 6.6 with CrNi steel

Injection riveting for the joining of thermoplastic composites with metal parts

Issue 2 (2021) Volume 15

Issue 2 (2021) Volume 15

Development of a test bench for the inline determination of the molten pool depth during the joining of additively manufactured structures and thermoplastic FRPs using a laser

Simulation and adhesive bonding of continuous fibre reinforced thermoplastics

Infrared welding in tempered ambient conditions

Issue 1 (2021) Volume 15

Issue 1 (2021) Volume 15

Process design and influencing factors in the case of the welding of foamed thermoplastics (TSG)

Using screw blind clinch riveting for the joining of metal parts with composites in the case of accessibility from one side

Manufacturing of plastics-metal-hybrid-composites by backmolding of resistance welded metal mesh

Issue 3-4 (2020) Volume 14

Issue 3-4 (2020) Volume 14

Effects of thermally induced residual stresses on the joint strengths of press-joined hybrid structures

Thermography for quality assurance in the case of ultrasonic welding

Adhesive bonding joining technologies for additively manufactured plastic components

Issue 2 (2020) Volume 14

Issue 2 (2020) Volume 14

Influences of moisture contents on the laser transmission welding process

Investigations into ultrasonic plastics welding as an innovative contacting technology for the integration of electronics into textiles

Weber Ultrasonics now manufactures masks and face masks in Germany

Issue 1 (2020) Volume 14

Issue 1 (2020) Volume 14

Joining and processing of non-woven materials: Ultrasonic technology for filter media

Good weld – bad weld: Selected aspects for the assessment of laser transmission welding

Mechanical long-term strengths of laserbeam- welded lap and T-joints made of ABS

Issue 3-4 (2019) Volume 13

Issue 3-4 (2019) Volume 13

Automatic temperature monitoring in plastic welding

Laser beam microstructuring of magnesium sheets made of ME20 – Potentials for the in-mould assembly of plastic/magnesium hybrid joints

Manufacture of organosheet hollow bodies with overlapping joints using infrared welding – Process influences and weld properties

Issue 2 (2019) Volume 13

Issue 2 (2019) Volume 13

Inline monitoring of the adhesive curing with contactless ultrasound

Laser transmission welding of transparent plastics – Part 2: Welding of PC with 1,940 nm laser radiation

Simulation-assisted evaluation of beam oscillation patterns during quasi-simultaneous laser transmission welding

Issue 1 (2019) Volume 13

Issue 1 (2019) Volume 13

Long-term loading of welded joints – What infuence do cyclic loads have on ultrasonically welded joints?

UFBC – New type of hybrid joining of metal and plastic

Experimental investigations into the dimensioning of the static pull-out strength of the screwed blind rivet

Issue 3-4 (2018) Volume 12

Issue 3-4 (2018) Volume 12

Quality monitoring of laser-beam-welded tapes made of fibre-reinforced plastics by means of thermography

Laser transmission welding of transparent plastics - Part 1: Consideration of the energy input

Quantification of the material damping properties using the mandrel melting-in test - Latest results, problems and solution strategies

Issue 2 (2018) Volume 12

Issue 2 (2018) Volume 12

Weld strengths of sandwich components with glass-fibre-reinforced core components

Structural adhesive bonding of glass-fibre-reinforced thermosetting plastics with optimised joining part materials

Welding of laser-sintered PA12 plastic components, Part 2 – Heated tool welding